Security Risk Severity
Critical Security Risks — Page 5
Published vulnerability pages grouped by critical severity. Use this page to review risks that need similar prioritization.
288 published critical risks
Critical severity
Showing 145–180 of 288 published risks.
CVE-2026-10536 curl vulnerability
A use-after-free vulnerability exists in libcurl when an application configures an HTTP/2 stream-dependency tree via `CURLOPT_STREAM_DEPENDS` or `CURLOPT_STREAM_DEPENDS_E`, subsequently invokes `curl_easy_reset()`, and finally terminates the handle with `curl_easy_cleanup()`. During this final cleanup phase, libcurl attempts to access and modify an internal structure that was already freed during the reset operation.
Updated Jul 14, 2026
CVE-2026-11564 curl vulnerability
libcurl keeps previously used connections in a connection pool for subsequent transfers to reuse if one of them matches the setup. An easy handle that first uses default native CA trust can continue trusting the native platform store after the application switches that same handle to custom CA material for a later transfer.
Updated Jul 14, 2026
CVE-2026-11856 curl vulnerability
Successfully using libcurl to do a transfer to a specific HTTP origin (`hostA`) with **Digest** authentication and then changing the origin to a different one (`hostB`) for a second transfer, reusing the same handle, makes libcurl wrongly pass on the `Authorization:` header field meant for `hostA`, to `hostB`.
Updated Jul 14, 2026
CVE-2026-8924 curl vulnerability
A flaw in curl’s cookie parsing logic allows a malicious HTTP server to set 'super cookies' that bypass the Public Suffix List check. This enables an attacker-controlled origin to inject cookies that curl subsequently scopes and transmits to unrelated third-party domains.
Updated Jul 14, 2026
CVE-2026-8925 curl vulnerability
The curl logic that works with SASL authentication could end up cleaning up the GSASL context *twice* without clearing the pointer in between, making it `free()` the same pointer twice.
Updated Jul 14, 2026
CVE-2026-8926 curl vulnerability
When asking curl to use a `.netrc` file to find credentials and at the same time specifying a URL with a username(without a password), like `https://user@example.com/`, curl could wrongly get and use the password for *another* user set in the `.netrc` file for that host if such a one exists and there is no match for the specified user.
Updated Jul 14, 2026
CVE-2026-8927 curl vulnerability
When reusing a libcurl handle for sequential transfers driven by environment-variable proxy configuration, libcurl fails to clear the proxy authentication state between requests. Specifically, if the initial transfer authenticates against `proxyA` using Digest auth, a subsequent transfer routed through `proxyB` erroneously leaks the `Proxy-Authorization:` header intended solely for `proxyA`.
Updated Jul 14, 2026
CVE-2026-9079 curl vulnerability
libcurl had a flaw that when instructed to clear proxy authentication credentials which made it not do so, leaving the old credentials around to get used for subsequent transfers that should not know nor use them.
Updated Jul 14, 2026
CVE-2026-12481 keras vulnerability
A vulnerability in keras-team/keras version 3.14.0 allows for arbitrary code execution due to improper handling of deserialization in the `Lambda` layer. Specifically, the `_raise_for_lambda_deserialization()` function fails to enforce the safe-mode guard when `safe_mode` is set to `None`, which is the default value when `from_config()` is called outside of a `SafeModeScope` context. This logic error conflates `None` (unset/default-deny) with `False` (explicitly disabled), bypassing the guard and allowing attacker-controlled `marshal` bytecode to be deserialized. Affected call sites include `keras.layers.deserialize(config)`, `keras.models.clone_model(model)`, and any direct invocation of `Lambda.from_config(config)` without an enclosing `SafeModeScope(True)`. This vulnerability can be exploited to achieve arbitrary OS-level code execution in the context of the server or user process.
Updated Jul 14, 2026
CVE-2026-58289 edge chromium vulnerability
Access of resource using incompatible type ('type confusion') in Microsoft Edge (Chromium-based) allows an unauthorized attacker to execute code over a network.
Updated Jul 14, 2026
CVE-2026-24013 iotdb vulnerability
Authentication Bypass by Spoofing vulnerability in Apache IoTDB. Certain Thrift RPC query handlers lack strict validation of the sessionId parameter. An attacker can construct requests with a forged sessionId and, without performing openSession authentication, receive valid query results. This allows authentication bypass and unauthorized reading of time-series data. This issue affects Apache IoTDB: from 1.3.3 before 2.0.8. Users are recommended to upgrade to version 2.0.8, which fixes the issue.
Updated Jul 13, 2026
CVE-2026-24014 iotdb vulnerability
Apache IoTDB DataNode’s internal RPC interface for creating Trigger instances uses the uploaded Trigger JAR name to build a file path without sufficient validation. If the internal DataNode RPC port is exposed to an untrusted network, an attacker may use path traversal sequences in the JAR name to write files outside the intended Trigger installation directory. This could allow arbitrary file write with the permissions of the IoTDB process. This issue affects Apache IoTDB: from 1.3.3 before 2.0.8. Users are recommended to upgrade to version 2.0.8, which fixes the issue.
Updated Jul 13, 2026
CVE-2026-40047 camel vulnerability
Improper Neutralization of Argument Delimiters in a Command ('Argument Injection') vulnerability in Apache Camel Docling component. The camel-docling component invokes the external `docling` command-line tool by assembling an argument list in DoclingProducer and executing it through java.lang.ProcessBuilder. Custom CLI arguments supplied through the `CamelDoclingCustomArguments` exchange header (a List<String>) were appended to that argument list with insufficient validation: the original implementation relied on a denylist of disallowed flags and only rejected path values that contained a literal `../` sequence. As a result, a Camel route that forwards externally-influenced data into the `CamelDoclingCustomArguments` header (or into the path-bearing headers used to build the invocation) could cause the producer to pass unrecognized or unintended `docling` CLI flags to the subprocess, and could supply path-like argument values that resolved outside the intended directory through traversal sequences not caught by the literal `../` check. Because Camel itself builds the `docling` invocation from these values, the component is responsible for constraining them, and the weak validation allowed CLI-argument injection and directory traversal in the arguments passed to the external tool. The invocation uses the list-based form of ProcessBuilder, so a shell does not interpret the argument values; OS command injection through shell metacharacters was not possible, and the metacharacter rejection added by the fix is defense-in-depth. This issue affects Apache Camel: from 4.15.0 before 4.18.3. Users are recommended to upgrade to a release that contains the CAMEL-23212 fix. On the mainline the fix is included from Apache Camel 4.19.0 (and later releases such as 4.20.0). For users on the 4.18.x LTS releases stream, upgrade to 4.18.3. The fix replaces the denylist with a strict allowlist of recognized `docling` CLI flags (rejecting any unrecognized flag, and rejecting producer-managed flags such as the output-directory flags), defensively rejects shell metacharacters in argument values, and normalizes path-like values with Path.normalize() before validating them so that traversal sequences which bypass a literal `../` check are detected. As defence in depth, route authors should avoid mapping untrusted message content into the `CamelDoclingCustomArguments` header and the path-bearing headers, and should strip Camel-internal headers from messages that arrive from untrusted producers.
Updated Jul 13, 2026
CVE-2026-43867 camel vulnerability
Deserialization of Untrusted Data vulnerability in Apache Camel PQC Component. The camel-pqc component persists post-quantum key metadata (KeyMetadata) through pluggable KeyLifecycleManager implementations. AwsSecretsManagerKeyLifecycleManager.deserializeMetadata() reads that metadata back from the configured AWS Secrets Manager secret by Base64-decoding the stored value and deserializing it with a raw java.io.ObjectInputStream.readObject() and no ObjectInputFilter or class allow-list; the cast to KeyMetadata happens only after readObject() returns, so any readObject() side effects in a crafted object run before the type check. A principal who can write to the AWS Secrets Manager secret that holds this metadata (requiring secretsmanager:PutSecretValue on that secret) could store a crafted serialized object that is deserialized during normal key-lifecycle operations, potentially leading to code execution in the context of the application that manages the keys. This is the same underlying defect, in the same code path and remediated by the same fix, as CVE-2026-46590, which was reported independently and additionally covers the HashiCorp Vault and file-based sibling managers; both are incomplete-remediation follow-ons to CVE-2026-40048 (CAMEL-23200). This issue affects Apache Camel: from 4.18.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x LTS releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, restrict write access to the AWS Secrets Manager secret that holds the camel-pqc key metadata so that only the application’s own identity holds secretsmanager:PutSecretValue on it (least-privilege IAM), and keep the PQC key material in a secret separate from any data that less-trusted principals can write.
Updated Jul 13, 2026
CVE-2026-46454 camel vulnerability
Improper Input Validation vulnerability in Apache Camel Cometd Component. The camel-cometd component maps inbound Bayeux (CometD) message headers into the Camel Exchange without applying a HeaderFilterStrategy. CometdBinding.populateExchangeFromMessage copies the entire ext.CamelHeaders map supplied by the CometD client directly onto the Camel message (message.setHeaders), so any header name - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelJmsDestinationName - is accepted unmodified. Because a CometdComponent installs no Bayeux SecurityPolicy by default, any client that can complete the Bayeux handshake against the CometD endpoint can publish such a message without authentication. An attacker can therefore inject arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a JMS destination); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix implements a HeaderFilterStrategy in the camel-cometd binding (a long-standing TODO in the code) that filters the Camel header namespace case-insensitively on inbound mapping, so client-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound CometD messages before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), and install an explicit Bayeux SecurityPolicy on the CometdComponent so that only authenticated clients can publish.
Updated Jul 13, 2026
CVE-2026-46455 camel vulnerability
Insufficient Session Expiration vulnerability in Apache Camel Keycloak Component. The camel-keycloak security helper KeycloakSecurityHelper.parseAndVerifyAccessToken builds a Keycloak TokenVerifier using withChecks(...) with only the subject-exists check and the realm-URL (issuer) check. Keycloak's TokenVerifier.withChecks(...) appends to an initially empty check list - the upstream default checks are installed only when withDefaultChecks() is called - so the built-in IS_ACTIVE predicate, which validates the token's exp (expiration) and nbf (not-before) claims, is never applied. As a result the helper verifies the token signature, subject and issuer but does not enforce the token's validity window: an access token that is expired, or not yet valid, is accepted as valid. Routes that rely on this helper to authenticate inbound requests therefore accept access tokens that are outside their intended lifetime. This issue affects Apache Camel: from 4.18.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes KeycloakSecurityHelper.parseAndVerifyAccessToken include the TokenVerifier.IS_ACTIVE check so that expired or not-yet-valid access tokens are rejected, aligning the helper with Keycloak's default check set. For deployments that cannot upgrade immediately, enforce token expiration outside the helper - for example validate the access token's exp/nbf claims in the route before trusting it, keep Keycloak access-token lifetimes short, and ensure any upstream gateway or resource server also validates the token validity window.
Updated Jul 13, 2026
CVE-2026-46456 camel vulnerability
Improper Input Validation vulnerability in Apache Camel AWS2-SQS Component. The camel-aws2-sqs component map inbound message attributes into the Camel Exchange through a component-specific HeaderFilterStrategy. Sqs2HeaderFilterStrategy configured only an outbound filter (setOutFilterPattern, which blocks Camel*, breadcrumbId and org.apache.camel.* headers being written to the broker) but did not configure an inbound filter. As a result, when Sqs2Consumer copies each SQS MessageAttribute into the Exchange via HeaderFilterStrategy.applyFilterToExternalHeaders, DefaultHeaderFilterStrategy applied no inbound rule and treated every header name as not filtered - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelSqlQuery - copying them unmodified onto the Camel message. Any principal able to send messages to the consumed SQS queue (for example a cross-account sender or a lower-privileged in-account component holding sqs:SendMessage) could therefore set arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a query); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix adds an inbound HeaderFilterStrategy rule to Sqs2HeaderFilterStrategy that filters the Camel header namespace case-insensitively on inbound mapping, so sender-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound messages before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), and restrict who may send to the consumed SQS queue by applying least-privilege sqs:SendMessage permissions on the queue resource policy.
Updated Jul 13, 2026
CVE-2026-48203 camel vulnerability
Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection'), Improper Input Validation, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel Solr component. The camel-solr producer copies Exchange message headers whose names begin with the SolrParam. prefix into the parameters of the Solr request, and headers whose names begin with the SolrField. prefix into the fields of the indexed Solr document. The prefix constants (SolrConstants.HEADER_PARAM_PREFIX / HEADER_FIELD_PREFIX) were the plain strings SolrParam. / SolrField.. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a solr: producer, any HTTP client could therefore set SolrParam.* headers to inject arbitrary Solr request parameters - including shards or stream.url, which cause the Solr server to issue server-side requests to an attacker-chosen URL (server-side request forgery, for example to an internal service or a cloud metadata endpoint), or qt to reach administrative request handlers - and set SolrField.* headers to inject arbitrary fields into indexed documents. No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set Solr parameters or fields via the raw header prefixes must use CamelSolrParam. / CamelSolrField. instead of SolrParam. / SolrField.. For deployments that cannot upgrade immediately, strip the SolrParam.* and SolrField.* headers from any untrusted ingress before the solr: producer, and set the required Solr parameters and fields from a trusted source in the route.
Updated Jul 13, 2026
CVE-2026-48204 camel vulnerability
Improper Input Validation, Improper Access Control vulnerability in Apache Camel in Camel Mongodb Gridfs component. The camel-mongodb-gridfs producer selects the GridFS operation to perform from the gridfs.operation Exchange header when the endpoint's operation parameter is not set - which is the default. The control-header constants (GridFsConstants.GRIDFS_OPERATION, GRIDFS_OBJECT_ID, GRIDFS_METADATA, GRIDFS_CHUNKSIZE, GRIDFS_FILE_ID_PRODUCED) were the plain strings gridfs.operation, gridfs.objectid, gridfs.metadata, gridfs.chunksize and gridfs.fileid. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a mongodb-gridfs: producer with no explicit operation, any HTTP client could therefore set the gridfs.operation header to override the route's intended operation - switching, for example, a file upload to remove (deleting a file identified by the attacker-supplied gridfs.objectid), listAll (enumerating every file in the bucket) or findOne (reading a file) - and supply a gridfs.metadata value that is parsed as a MongoDB document, enabling NoSQL operator injection. No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that drive GridFS operations or metadata via the raw header names must use CamelGridFsOperation / CamelGridFsObjectId / CamelGridFsMetadata / CamelGridFsChunkSize / CamelGridFsFileId instead of the gridfs.* names. For deployments that cannot upgrade immediately, set an explicit operation on the mongodb-gridfs: endpoint so the operation is not taken from a header, and strip the gridfs.* headers from any untrusted ingress before the producer.
Updated Jul 13, 2026
CVE-2026-48205 camel vulnerability
Improper Input Validation, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel DNS component. The camel-dns producers read DNS operation parameters - the resolver to query, the name or domain to look up, the record type and class, and the search term - from Exchange message headers whose constant values (DnsConstants.DNS_SERVER, DNS_NAME, DNS_DOMAIN, DNS_TYPE, DNS_CLASS, TERM) were the plain strings dns.server, dns.name, dns.domain, dns.type, dns.class and term. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a dns: producer, any HTTP client could therefore set the dns.server header to make the dig producer build a SimpleResolver pointing at an attacker-controlled DNS server - a server-side request forgery via DNS, through which the attacker observes the queried name and can return poisoned responses - and set the dns.name / dns.domain headers to resolve arbitrary internal hostnames, disclosing whether they exist (internal network reconnaissance). No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that drive DNS operations via the raw header names must use CamelDnsServer / CamelDnsName / CamelDnsDomain / CamelDnsType / CamelDnsClass / CamelDnsTerm instead of the dns.* / term names. For deployments that cannot upgrade immediately, strip the dns.* and term headers from any untrusted ingress before the dns: producer, and set the DNS server and lookup parameters from a trusted source in the route.
Updated Jul 13, 2026
CVE-2026-53913 camel vulnerability
Improper Authentication, Missing Authentication for Critical Function, Not Failing Securely ('Failing Open') vulnerability in Apache Camel Keycloak Component. The KeycloakSecurityPolicy of camel-keycloak guards a route by running KeycloakSecurityProcessor.beforeProcess(), which performs three checks in sequence: it rejects a request that carries no access token, then - only if requiredRoles is non-empty - validates the roles, and - only if requiredPermissions is non-empty - validates the permissions. The actual cryptographic verification of the bearer access token (signature, issuer and expiry for a local JWT, or active-state and issuer for token introspection) is performed exclusively inside those role and permission checks. KeycloakSecurityPolicy defaults requiredRoles and requiredPermissions to empty - which is the documented 'Basic Setup' - so on a route configured that way the role and permission checks are skipped and the access token is therefore never verified. The token-presence check still rejects a missing token, but an invalid token is accepted: any non-null value in the Authorization: Bearer header - including an arbitrary string or a forged, unsigned JWT - passes the policy and the request reaches the protected route, with no signature, issuer or expiry check and no request to Keycloak. The token is read from the inbound request header because allowTokenFromHeader defaults to true. Because the normal reason to place a route behind this policy is that the route performs server-side work, the bypass results in unauthenticated access to that work; where the protected route forwards to a code-execution-capable producer, it can result in unauthenticated remote code execution. This defect is independent of CVE-2026-23552: that issue concerned the issuer claim and was fixed by adding a check inside the verification routine, but here the verification routine is not reached at all in the default configuration, so the defect remains. This issue affects Apache Camel: from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, configure a non-empty requiredRoles or requiredPermissions on every KeycloakSecurityPolicy so that the token-verification path is exercised, set allowTokenFromHeader to false where the token is not expected from the request header, or perform token verification at the framework layer ahead of the policy.
Updated Jul 13, 2026
CVE-2026-56140 camel vulnerability
Improper Input Validation vulnerability in Apache Camel AWS SNS component. The camel-aws2-sns component filters Camel headers through a component-specific HeaderFilterStrategy, Sns2HeaderFilterStrategy. Like the sibling Sqs2HeaderFilterStrategy, it originally configured only an outbound filter (setOutFilterPattern, which blocks Camel*, breadcrumbId and org.apache.camel.* headers from being written out) and did not configure an inbound filter rule. For the related camel-aws2-sqs component this inbound gap was exploitable, because the Sqs2Consumer maps inbound SQS message attributes into the Camel Exchange via HeaderFilterStrategy.applyFilterToExternalHeaders, allowing a message sender to inject Camel control headers (tracked as CVE-2026-46456). camel-aws2-sns, by contrast, is producer-only: Sns2Endpoint does not support consumers (createConsumer throws UnsupportedOperationException, 'You cannot receive messages from this endpoint'), so no externally-supplied message attributes are ever mapped inbound into a Camel Exchange through SNS, and the missing inbound filter rule on Sns2HeaderFilterStrategy was therefore not reachable by an attacker. As part of the same fix (CAMEL-23506), an inbound filter rule (setInFilterStartsWith for the Camel namespace) was added to Sns2HeaderFilterStrategy so that its configuration matches the corrected Sqs2HeaderFilterStrategy and the other sibling strategies. This is a defense-in-depth alignment with no known exploit path in camel-aws2-sns. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. This is a defense-in-depth hardening change with no known exploit path in camel-aws2-sns, which is producer-only, so no urgent action or workaround is required. Users who want the aligned behaviour can upgrade to version 4.21.0, or to 4.14.8 on the 4.14.x LTS releases stream, or to 4.18.3 on the 4.18.x releases stream, which contain the change. As a general best practice, operators should continue to apply least-privilege IAM permissions on their SNS topics.
Updated Jul 13, 2026
CVE-2026-40138 privileged remote access vulnerability
A critical pre-authentication vulnerability exists in the authentication subsystem of BeyondTrust Remote Support and Privileged Remote Access. Improper validation of authentication data may allow a network-positioned attacker to bypass access controls and gain unauthorized access to the appliance, including accounts with elevated privileges. Exploitation requires a specific authentication configuration to be enabled
Updated Jul 13, 2026
CVE-2026-40139 privileged remote access vulnerability
A critical pre-authentication vulnerability exists in the authentication subsystem of BeyondTrust Remote Support. Improper processing of authentication requests may allow an unauthenticated remote attacker to bypass access controls and gain unauthorized access to the appliance, including accounts with elevated privileges. Exploitation requires a specific authentication configuration to be enabled.
Updated Jul 13, 2026
CVE-2026-48316 coldfusion vulnerability
ColdFusion versions 2025.9, 2023.20 and earlier are affected by an Improper Input Validation vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue does not require user interaction. Scope is changed.
Updated Jul 13, 2026
CVE-2026-9181 arcgis server vulnerability
Esri ArcGIS Server contains a directory traversal vulnerability. ArcGIS Enterprise on Kubernetes is not impacted. An unauthenticated attacker could exploit this issue by sending crafted path parameters. Successful exploitation could allow overwriting sensitive files on the system. Abuse of this issue can allow full administrative access to ArcGIS Server, with high impact to confidentiality, integrity, and availability. This issue impacts all versions of ArcGIS Server on Windows and Linux 12.0 and prior. This issue does not impact ArcGIS Enterprise for Kubernetes.
Updated Jul 13, 2026
CVE-2026-9182 arcgis server vulnerability
Esri ArcGIS Server contains an unrestricted file upload vulnerability. An unauthenticated attacker could exploit this issue by uploading a crafted file to the affected endpoint. Successful exploitation could allow arbitrary file upload, potentially allowing for other attacks. This issue impacts all versions of ArcGIS Server on Windows and Linux 12.0 and prior. This issue does not impact ArcGIS Enterprise for Kubernetes.
Updated Jul 13, 2026
CVE-2026-57571 crawl4ai vulnerability
Crawl4AI is an open-source LLM-friendly web crawler and scraper. Prior to 0.9.0, when the crawler saves a downloaded file, the destination filename was taken from attacker-influenced input and joined to the downloads directory with no confinement. A filename containing an absolute path or traversal escaped the downloads directory, giving an arbitrary file write with attacker-controlled contents; the HTTP crawler path uses the response Content-Disposition filename and the browser crawler path uses the download's suggested filename. Because the written bytes are attacker-controlled, this can escalate to remote code execution. This issue is fixed in version 0.9.0.
Updated Jul 13, 2026
CVE-2026-57572 crawl4ai vulnerability
Crawl4AI is an open-source LLM-friendly web crawler and scraper. Prior to 0.9.0, the Docker API server accepted request-supplied browser_config.extra_args, which flowed into Chromium's launch arguments. An attacker could inject Chromium switches that replace a child-process launch command together with --no-zygote, causing Chromium to fork or exec an attacker-controlled command as the container's runtime user. The Docker API is unauthenticated by default, so a single request yields arbitrary command execution. This issue is fixed in version 0.9.0.
Updated Jul 13, 2026
CVE-2026-59827 metabase vulnerability
Metabase is an open-source business intelligence and embedded analytics tool. Prior to 1.58.15, 1.59.12, 1.60.6.3, and 1.61.1.4, Metabase instances with an H2 database connection, including the default sample database, deserialize arbitrary Java objects returned in H2 native query result columns of type OTHER without validation, allowing an authenticated user who can run native H2 queries to execute code on the Metabase server. This issue is fixed in versions 1.58.15, 1.59.12, 1.60.6.3, and 1.61.1.4.
Updated Jul 13, 2026
CVE-2026-56261 crawl4ai vulnerability
Crawl4AI before 0.8.7 contains a server-side request forgery (SSRF) vulnerability in the Docker API server's /crawl/job and /llm/job endpoints, which accept webhook URLs without destination validation. An attacker can supply webhook URLs pointing to private or internal IP ranges, Docker networks, or cloud metadata endpoints (e.g. 169.254.169.254), causing the server to make requests to internal services and potentially expose cloud metadata.
Updated Jul 13, 2026
Printcart Web to Print Product Designer for WooCommerce <= 2.5.2 - Unauthenticated Arbitrary File Deletion
The Printcart Web to Print Product Designer for WooCommerce plugin for WordPress is vulnerable to Arbitrary File Deletion in versions up to, and including, 2.5.2 This is due to insufficient path validation in the store_design_data() function, which constructs a filesystem path from the user-supplied 'nbd_item_key' POST parameter sanitized only with sanitize_text_field() — which does not strip path traversal sequences — and then passes that path directly to Nbdesigner_IO::delete_folder() and PHP's rename(). The nonce protecting the nbd_save_customer_design AJAX action is freely obtainable by unauthenticated users via the nbd_check_use_logged_in endpoint. This makes it possible for unauthenticated attackers to delete arbitrary files on the affected site's server which may make remote code execution possible.
Updated Jul 13, 2026
Cisco IOS Cross-Site Request Forgery Vulnerability
Cisco IOS 12.4 contains multiple cross-site forgery vulnerabilities that allows remote attackers to execute arbitrary commands via (1) a certain "show privilege" command to the /level/15/exec/- URI, and (2) a certain "alias exec" command to the /level/15/exec/-/configure/http URI.
Updated Jul 13, 2026
miniOrange Social Login and Register (Discord, Google, Twitter, LinkedIn) <= 7.7.0 - Unauthenticated Authentication Bypass to Administrator Account Takeover via Profile Completion OTP Flow
The miniOrange Social Login and Register (Discord, Google, Twitter, LinkedIn) plugin for WordPress is vulnerable to authentication bypass leading to account takeover in versions up to and including 7.7.0. This is due to the Profile Completion flow accepting an arbitrary email address via the 'email_field' POST parameter without verifying that the email belongs to the identity returned by the OAuth provider, combined with send_otp_token() returning the SHA-512(customer_key || otp) transaction hash to the client where the OTP space is only 99,000 values (wp_rand(1000, 99999)) and the customer_key is a static option (empty on unregistered installs). This makes it possible for unauthenticated attackers to trigger an OTP email to an arbitrary admin's address, crack the OTP offline from the leaked hash in under a second, and submit the cracked OTP to mo_openid_social_login_validate_otp(), which logs the attacker in as the user whose email was supplied — granting full administrator access.
Updated Jul 13, 2026
Super Forms <= 6.3.313 - Unauthenticated Arbitrary File Upload via 'data' Parameter (datauristring / value)
The Super Forms – Drag & Drop Form Builder plugin for WordPress is vulnerable to Arbitrary File Upload in all versions up to, and including, 6.3.313 via the submit_form function. This is due to missing file type validation and the absence of any capability check on the submit_form nopriv AJAX handler, whose only barrier is a session nonce freely obtainable by unauthenticated visitors via a separate nopriv endpoint. This makes it possible for unauthenticated attackers to upload files that may be executable, which makes remote code execution possible. The nonce requirement is trivially bypassed because the super_create_nonce nopriv AJAX action allows any unauthenticated visitor to mint a valid sf_nonce and session cookie in a single prior request, reducing exploitation to two unauthenticated HTTP requests.
Updated Jul 13, 2026
CVE-2026-59792 JetBrains IntelliJ IDEA vulnerability
In JetBrains IntelliJ IDEA before 2026.1.4, 2026.2 code execution via path traversal in project workspace ID handling was possible
Updated Jul 12, 2026